Pages

HOMELITE XL 902AM.



TYPICAL SAW BEFORE RESTORATION.....A PICTURE TELLS A THOUSAND WORDS......

MANUFACTURED BY:TERRY INDUSTRIES, A DIVSION OF TEXTRON CANADA LIMITED, POINTE-CLAIRE.
SERIES OR ASSEMBLY NUMBER: 50038
YEAR INTRODUCED:1970
ENGINE DISPLACEMENT:4.7 cu. in. (77 cc)
NUMBER OF CYLINDERS:1
CYLINDER BORE:2.0 in. (50.8 mm)
PISTON STROKE:1.5 in. (38 mm)
CYLINDER TYPE:Aluminum with chrome plated bore
INTAKE METHOD:4 pyramid reed
MANUFACTURER ADVERTISED H.P.:not advertised
WEIGHT :15-1/2 lbs. (7 kg) powerhead only
OPERATOR CONFIGURATION:One Man operation
HANDLEBAR SYSTEM:Rigid
CHAIN BRAKE:none
CLUTCH:Centrifugal
DRIVE TYPE:Direct
CONSTRUCTION:Die cast magnesium
MAGNETO TYPE:Flywheel magneto
CARBURETOR:Tillotson HS-73A series
MAJOR REPAIR KIT:RK-23HS
MINOR REPAIR KIT:DG-5HS/T
AIR FILTER SYSTEM:Cellulose fiber element
STARTER TYPE:Automatic rewind
OIL PUMP:Automatic with manual override
OPERATING RPM:6,000 under load
IGNITION TIMING:30 degrees before TDC
BREAKER POINT SETTING: 0.015 in. (0.38 mm)
FLYWHEEL/COIL AIR GAP:Position is fixed
SPARK PLUG TYPE:Champion CJ-6
SPARK PLUG GAP:0.025 in. (0.63 mm)
CRANKSHAFT MAIN BEARINGS:Ball on flywheel end, caged needle roller on clutch end
FUEL TANK CAPACITY:35 fl. oz. (1035 ml)
FUEL OIL RATIO:16:1
RECOMMENDED FUEL OCTANE:Regular grade 72 to 83
MIX OIL SPECIFICATION:Homelite two-cycle mix oil
CHAIN PITCH:3/8 in.
CHAIN TYPE:Oregon 72D
BAR MOUNT PATTERN:14 link
SHORTEST GUIDE BAR SUPPLIED:12 in. (30 cm)
LONGEST GUIDE BAR SUPPLIED:36 in. (91 cm)
COLOUR SCHEME:Homelite Red and Green with White accents
THIS SAW WAS manufactured in CANADA ONLY