MANUFACTURED BY: PIONEER SAWS LTD. PETERBOROUGH, ONTARIO, CANADA
YEAR INTRODUCED:
1957
YEAR DISCONTINUED:
1958
ENGINE DISPLACEMENT:
6.1 cu. in. (100.5 cc)
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
2.250 in. (57 mm)
PISTON STROKE:
1.5625 in. (40 mm)
CYLINDER TYPE:
Aluminum with cast iron sleeve
INTAKE METHOD:
Piston ported
MANUFACTURER ADVERTISED H.P.:
not advertised
WEIGHT :
OPERATOR CONFIGURATION:
One Man operation
HANDLEBAR SYSTEM:
Rigid
CHAIN BRAKE:
none
CLUTCH:
Centrifugal, 3 shoe with bonded lining
DRIVE TYPE:
Direct
CONSTRUCTION:
Sand cast aluminum
MAGNETO TYPE:
Wico
CARBURETOR:
Tillotson HL-22A diaphragm type
MAJOR REPAIR KIT:
RK-88HL
MINOR REPAIR KIT:
DG-5HL
AIR FILTER SYSTEM:
Flocked screen
STARTER TYPE:
Fairbanks Morse automatic rewind
OIL PUMP:
Manual pump
OPERATING RPM:
IGNITION TIMING:
30 degrees B.T.D.C. (1.554 in.)
BREAKER POINT SETTING:
.020 in. (0.51 mm)
FLYWHEEL/COIL AIR GAP:
Position is fixed
SPARK PLUG TYPE:
Champion J8J
SPARK PLUG GAP:
.025 in. (0.63 mm)
CRANKSHAFT MAIN BEARINGS:
Ball
FUEL TANK CAPACITY:
FUEL OIL RATIO:
1 quart oil to 3 gallons fuel (12-1)
RECOMMENDED FUEL OCTANE:
Regular
MIX OIL SPECIFICATION:
SAE 40
CHAIN PITCH:
.4
CHAIN TYPE:
IEL C3F or C3G
BAR MOUNT PATTERN:
SHORTEST GUIDE BAR SUPPLIED:
16 in. (40cm)
LONGEST GUIDE BAR SUPPLIED:
32 in. (81cm)
COLOUR SCHEME:
Yellow enamel