Pages

PM 350 (POWER MACHINERY).

MANUFACTURED BY: PM (Power Machinery Ltd.) VANCOUVER, BRITISH COLUMBIA, CANADA SERIES OR ASSEMBLY NUMBER: YEAR INTRODUCED: 1967 YEAR DISCONTINUED: ENGINE DISPLACEMENT: 5.8 cu. in. (95cc) NUMBER OF CYLINDERS: 1 CYLINDER BORE: 2.3125 in. (58.7mm) PISTON STROKE: 1.375 in. (34.9mm) CYLINDER TYPE: Aluminum with cast iron sleeve INTAKE METHOD: Piston ported MANUFACTURER ADVERTISED H.P.: not advertised WEIGHT: 16.5 lbs. (7.5kg) powerhead only OPERATOR CONFIGURATION: One Man operation HANDLEBAR SYSTEM: Rigid CHAIN BRAKE: none CLUTCH: Centrifugal DRIVE TYPE: Direct CONSTRUCTION: Sand cast magnesium MAGNETO TYPE: Wico flywheel type CARBURETOR: Tillotson HS series MAJOR REPAIR KIT: RK-23HS MINOR REPAIR KIT: DG-5HS/T AIR FILTER SYSTEM: Flocked wire screen element STARTER TYPE: Fairbanks Morse automatic rewind OIL PUMP: Manual MAXIMUM ENGINE RPM: IDLE RPM: IGNITION TIMING: Fixed BREAKER POINT SETTING: 0.015 in. (0.38 mm) FLYWHEEL/COIL AIR GAP: Position is fixed SPARK PLUG TYPE: Champion J6J SPARK PLUG GAP: 0.025 in. (0.63 mm) CRANKSHAFT MAIN BEARINGS: Ball FUEL TANK CAPACITY: 1.22 Imp. Pints (690ml) FUEL OIL RATIO: 16:1 RECOMMENDED FUEL OCTANE: Regular MIX OIL SPECIFICATION: Two-stroke chain saw mix oil CHAIN PITCH: 3/8 in. CHAIN TYPE: Oregon BAR MOUNT PATTERN: SHORTEST GUIDE BAR SUPPLIED: 15 in. (38cm) LONGEST GUIDE BAR SUPPLIED: 30 in. (76cm)

TESTIMONY: