TERRILL CS5B

MANUFACTURED BY: TERRILL D.D. SAW CO. BANGOR, MAINE, U.S.A. SERIES OR ASSEMBLY NUMBER: YEAR INTRODUCED: 1957 YEAR DISCONTINUED: ENGINE DISPLACEMENT: 5.1 cu. in. (83.5 cc) NUMBER OF CYLINDERS: 1 CYLINDER BORE: PISTON STROKE: CYLINDER TYPE: INTAKE METHOD: MANUFACTURER ADVERTISED H.P.: WEIGHT : 24 lbs. (10.88 kg.) OPERATOR CONFIGURATION: One Man operation HANDLEBAR SYSTEM: CHAIN BRAKE: CLUTCH: Centrifugal DRIVE TYPE: Gear reduction CONSTRUCTION: MAGNETO TYPE: CARBURETOR: MAJOR REPAIR KIT: MINOR REPAIR KIT: AIR FILTER SYSTEM: STARTER TYPE: OIL PUMP: Automatic OPERATING RPM: IGNITION TIMING: BREAKER POINT SETTING: FLYWHEEL/COIL AIR GAP: SPARK PLUG TYPE: Champion J-12-J SPARK PLUG GAP: 0.040 in. (1.01 mm) CRANKSHAFT MAIN BEARINGS: FUEL TANK CAPACITY: FUEL OIL RATIO: RECOMMENDED FUEL OCTANE: MIX OIL SPECIFICATION: CHAIN PITCH: 1/2 in. CHAIN TYPE: Oregon 10C BAR MOUNT PATTERN: SHORTEST GUIDE BAR SUPPLIED: 14 in. (35 cm) LONGEST GUIDE BAR SUPPLIED: 24 in. (61 cm)

TERRILL CS5

MANUFACTURED BY:TERRILL D.D. SAW CO.BANGOR, MAINE, U.S.A. YEAR INTRODUCED:1957 ENGINE DISPLACEMENT:5.1 cu. in. (83.5 cc) NUMBER OF CYLINDERS:1 CYLINDER BORE:2.00 in. (50.8mm) PISTON STROKE:1.625 in. (41.2mm) CYLINDER TYPE:Aluminum with cast iron liner INTAKE METHOD:Reed valves WEIGHT :24 lbs. (10.8 kg.) OPERATOR CONFIGURATION:One Man operation HANDLEBAR SYSTEM:Rigid CHAIN BRAKE:none CLUTCH:Centrifugal DRIVE TYPE:Gear reduction CONSTRUCTION:Sand cast aluminum MAGNETO TYPE:Wico FW2317 CARBURETOR:Tillotson HP series STARTER TYPE:Fairbanks Morse automatic rewind OIL PUMP:Automatic IGNITION TIMING:1/4" before TDC BREAKER POINT SETTING:0.020 in. (0.51mm) FLYWHEEL/COIL AIR GAP:fixed SPARK PLUG TYPE:Champion J-12-J SPARK PLUG GAP:0.040 in. (1.01mm) CRANKSHAFT MAIN BEARINGS:Ball FUEL OIL RATIO:1/2 pint to 1 gallon RECOMMENDED FUEL OCTANE:Regular MIX OIL SPECIFICATION:SAE 30 CHAIN PITCH:1/2 in. CHAIN TYPE:Oregon 10C SHORTEST GUIDE BAR SUPPLIED:14 in. (35cm) LONGEST GUIDE BAR SUPPLIED:36 in. (91cm) COLOUR SCHEME:Yellow and Red enamel

TERRILL 50.

TERRILL 50
MANUFACTURED BY: TERRILL D.D. SAW CO. BANGOR, MAINE, U.S.A.

UNDER RESTORATION...NO TECHNICAL AT THIS TIME.

Founder of the company was Albert Terrill. Company in operation from early fifties an discontinued chainsaw production abt 1960 but still sold wedges after this timeframe.
History from William Greene...collector
William & son Forrest took a trip to see the current owner of the last remaining Terrill's , and got a chance to talk to the guy who assembled his saw in 1955 model 50. he also said that there were at the most 3-400 made total.
Our host that gave us the "tour" was mr. R.D.FAULKNER of Bangor,ME. he has been in the chainsaw selling business since 1954. during highschool Reggie would go to work at Terrill saw co and put saws together. He was telling us that the crankshaft's were breaking and that finally they corrected the problem by sending the crank's to a heat treating facility in Concord,N.H. to harden the soft crank's.
Terrill saws are very collectible and rare to find in decent restorable condition.