TITAN 30 .

TITAN 30


MANUFACTURED BY: TITAN CHAIN SAWS INC. SEATTLE, WASHINGTON, U.S.A. YEAR INTRODUCED: 1954 ENGINE DISPLACEMENT:5.10 cu. in. (83.5cc) BORE:2 in. (50.8mm) STROKE:1.625 in. (41.2mm) CYLINDER TYPE: Aluminum with cast iron sleeve INTAKE METHOD: Reed valve MANUFACTURER ADVERTISED H.P.: 3 CONSTRUCTION: Sand cast magnesium MAGNETO TYPE: Wico

TITAN 30 (DUPLICATE)


MANUFACTURED BY: TITAN CHAIN SAWS INC. SEATTLE, WASHINGTON, U.S.A.
YEAR INTRODUCED: 1954
ENGINE DISPLACEMENT:5.10 cu. in. (83.5cc)
BORE:2 in. (50.8mm)
STROKE:1.625 in. (41.2mm)
CYLINDER TYPE: Aluminum with cast iron sleeve
INTAKE METHOD: Reed valve
H.P.: 3
CONSTRUCTION: Sand cast magnesium
MAGNETO: Wico
CYLINDER BORE:2 in. (50.8mm)
PISTON STROKE:1.625 in. (41.2mm)
CYLINDER TYPE:Aluminum with cast iron sleeve
INTAKE METHOD:Reed valve
MANUFACTURER ADVERTISED H.P.:3
WEIGHT :27 lbs. with 14 in. bar & chain
OPERATOR CONFIGURATION:One Man operation
CLUTCH:Centrifugal
DRIVE TYPE:Direct
CONSTRUCTION:Sand cast magnesium
MAGNETO TYPE:Wico
CARBURETOR:Tillotson H series, fuel tank is pressurized
AIR FILTER SYSTEM:Skinner ribbon element
STARTER TYPE:Fairbanks Morse automatic rewind
OIL PUMP:Automatic
OPERATING RPM:4,000
BREAKER POINT SETTING:0.018 in. to 0.020 in.
SPARK PLUG TYPE:Champion J-12
SPARK PLUG GAP:0.040 in.
FUEL OIL RATIO:1/2 pint to 1 gallon
RECOMMENDED FUEL OCTANE:Regular
MIX OIL SPECIFICATION:SAE 30 or SAE 40
CHAIN PITCH:7/16 in.